i/o.site provides performance monitoring of electro-mechanical components while keeping everyone connected to information through a simple, easy-to-use web interface. i/o.site can be integrated to remotely monitor any blower, aerator, pump, float switch, or motor; regardless of type or model.

Capabilities:

Track water use

Catch motor issues before failure

Use any mobile device or computer

Connect intuitively with simple interface

Monitor any powered on-site system

Set up in under 30 minutes

Technical Specifications

Dimensions 5.12” x 3.54” x 1.57” (130mm x 90m x 40mm)

Enclosure Rating IP-67 (splashproof, exterior)

Supply Specs 5VDC +/-5%, 1 amp max, center positive jack

Current < 400ma @ 5v

Power Consumption < 2W peak

Number of Current Sensing Circuits 3 (kit comes with one current sensor and one 12V float)

Max Amperage Sensing 10, 20, or 100 amps (depending on component)

Number of Inputs 2 Analog/Digital (float / transducer) + 1 Digital (alarm)

Analog Input Voltage 0 - 3.3V

Input Protection Reverse polarity and overvoltage protection

Internet Connection RJ-45, 6 ft cable (attached)

Connector Cable Length 6 ft

Optimal Operating Temperature 0°C (32°F) to 50°C (122°F)

Note: Additional current sensors or 12V floats can be added when ordering.